SCANNY
1.1.0 beta 13
1.1.0 beta 13Smart fixesDATE05 OCT 2026CHANGES05BETA
Smart fixes on PATCH and MAP: one best button with its reason, at most one other choice, exact device steps with I DID IT · CHECK, and FIX ALL fixes everything Scanny can without making a new problem. Never an on-air camera, never a send to a device.
SAFETY 01
Smart fixes never touch an on-air camera and never send to a device
A fix for a camera on air, on REC, on preview, with its tally not read or held by an RCP waits in amber with "on air · after". APPLY checks again, so a camera that went on air since is left out, a chain fix that needs it waits with it, and the result names the camera. If what is left would still put one CCU number on two cameras, nothing is written. Smart fixes change Scanny's own files only; FBS ID, CAM CH, TSL, camera addresses and RCP setups stay steps for you.
NEW 03
PATCH and MAP: smart fixes
Each problem card shows one best button and the reason for it, for example KEEP CCU 8 · IP plan 11 base stations agree. At most one other choice sits beside it. When two choices are equally good, the card says so and leaves the pick to you.
Device steps with I DID IT · CHECK
A change that lives on a device (an LPS-1 FBS ID or CAM CH, the switcher's TSL index, an ALEXA address, an RCP's own setup) is a step that names the device, the field, the value now and the value to set, for example On the LPS-1 at its address: FBS ID → 08. Make the change, press I DID IT · CHECK, and Scanny reads it back for 20 s.
FIX ALL fixes what Scanny can, without a new problem
FIX ALL n stages every Scanny-side fix that clears a problem and makes no new one, chains included: when one fix frees a CCU number, the camera that needs it gets it in the same go. The review lists what was left out and why. Nothing is applied until you press APPLY.
FIXED 01
COPY PATCH SHEET prints the smart fixes
The sheet's fix lines are the cards' buttons and steps, with optional steps marked, so following the sheet never puts one CCU number on two base stations.