SCANNY
1.1.0 beta 16
1.1.0 beta 16DATE09 OCT 2026CHANGES10BETA
29 more ALEXA MENU rows change over the network, no dialogs anywhere in camera work, paint on air goes on LIVE, COPY runs every camera at once, and the SHOW button always lands on the SHOW grid.
SAFETY 02
Picture rows skip on air with OPEN
ND, shutter angle, exposure time, knee, multimatrix bypass, filter sharpness and AWB area are skipped on air, with tally unknown, in REC and in pre-record while the arm is OPEN. SEND checks again; LIVE sends them.
Tally and web calls stay honest
Tally stays on the camera in this beta. The tally state, the three lamps, the trigger and the channel read NEXT BETA, so a lamp test can never hide a real take. The camera's screen mode is skipped on air and in PVW. IRIS OPEN / CLOSE and PRE-REC over the web stay UNVERIFIED on show cameras until the spare proves them.
NEW 01
29 MENU rows now change over the network
Rows that used to say CAM ONLY or VIEW ONLY now change from Scanny in one press: CALL, codec and resolution (checked first, then set), active medium, playback clip name, focus position, saving a look, button locks, timecode source, date and set to camera time, power warnings and auto boot, EVF surround, EVF and SDI 1 status overlays, the camera's screen mode, look switch per output, and the audio sources and solo on LAN cameras.
IMPROVED 04
What still lives on the camera, and why
The fiber adapter address stays ON CAMERA: a wrong value takes the head off the network and nothing remote can undo it. On a camera behind a base station, the rows only the camera's own web remote can set read ON CAMERA too; they change from Scanny on LAN cameras. Rows that come next read NEXT BETA: white balance, fps and shutter preset add, audio level and gain, button assign and user button presses, message clear, playback and clip skip, GRAB, LIST, ALE export, lens speeds, lens table load, look and lens table install from the camera's list, WiFi mode and channel, the tally state and the red, green and yellow lamps, trigger and channel, intercom, video knee, gamma and saturation, seven overlay, audio and WRS rows Scanny can't read back yet, and the multi-value editors. Nothing looks writable that can't be sent.
No dialogs in camera work
One press goes. No typed confirms, no AGAIN?, no pop-ups, and no on-air setting to switch. Protection is automatic: a row that can't go now is skipped by its class, keeps the value you set and shows why (ON AIR, PVW, REC). Press SEND to check again and send it if it is clear.
Paint on air goes on LIVE
With the arm on LIVE, paint rows go to a camera on air in one press. On OPEN they go off air and wait while the camera is on air.
COPY runs every camera at once
Each ticked camera runs on its own. A camera that is skipped or doesn't answer never holds up the others, and STOP lets the writes already out finish and sends nothing new.
FIXED 03
The SHOW button always takes you to the SHOW grid
The SHOW button in the header now reads SHOW next to its grid icon. Press it from any page and you land on the SHOW grid. Press it again on the grid to turn SHOW off. CMD+SHIFT+S does the same.
CONTROL OVER WI-FI chip removed
The amber CONTROL OVER WI-FI chip is gone from the header. It showed on a Mac with the truck cable and Wi-Fi both on, even when camera control went over the cable. SETUP PUSH now says control runs over Wi-Fi only for an ALEXA whose own link is on the Mac's Wi-Fi port.
ALEXA control prefers the cable when the Mac is on both cable and Wi-Fi
One ALEXA can answer on the truck cable and on Wi-Fi at once. Its control link now goes on the cable whenever Scanny hears it there, and on Wi-Fi only when that is the only way in.